fiber optic technology calibration laboratory is registered trademark of optokon co., ltd. other names and trademarks mentioned herein may be the trademarks of their respect ive owners. con_07-02_en 14/06/2005 optokon co., ltd., cerveny kriz 250, 586 02 jihlava, czech republic tel. +420 564 040 111, fax +420 564 040 134, +420 567 311 292, www.optokon.com, info@optokon.cz 1 master patchcord description: we offer an extensive range of pre-terminated cable assemblies that are 100% tested to ensure conformance with your specifications. these assemb lies are used for measuring and manufacturing of fiber optic components and optical network testing. the master patchcord is equipped with a master connector according to the specifications below. the second connector is a standard type. for the hy brid patchcord version different types of master and standard connector types are also available. m-usc/usc-20 sm m-sc/sc-28 m6s specifications: singlemode multimode insertion loss (il) 0.1 db ( = 1310, 1550, 1650 nm) 0.1 db ( = 850, 1300 nm) return loss (rl) upc 55 db pc 30 db apc 65 db geometrical parameters: eccentricity of core for the center of ferrule 0.5 m 0.5 m outer diameter of ferrule standard connectors: 2.499 m sff connectors: 1.249 m end curve offset 25 m fiber height -30 to +50 nm end curve radius standard connectors: pc polishing 10 ? 18 mm apc polishing 5 ? 12 mm sff connectors: pc/apc 5 ? 12 mm apc angle 8 0.1 n/a temperature stability (-40c to +80c) < 0.2 db < 0.2 db mating durability (500 cycles) < 0.2 db < 0.2 db cable retention (? 2.8 mm) 100 n 100 n material: connector body metal, plastic metal, plastic ferrule material full ceramic zirconia full ceramic zirconia fibre 9/125 50/125; 62.5/125 crimp sleeve metal metal boot rubber rubber underwriters laboratories approval, file number obfa.e231946
fiber optic technology calibration laboratory is registered trademark of optokon co., ltd. other names and trademarks mentioned herein may be the trademarks of their respect ive owners. con_07-02_en 14/06/2005 optokon co., ltd., cerveny kriz 250, 586 02 jihlava, czech republic tel. +420 564 040 111, fax +420 564 040 134, +420 567 311 292, www.optokon.com, info@optokon.cz 2 visual inspection: singlemode allowable defects and scratches zone description diameter defe cts (diameter) scratches (width) 1a core zone 0 to 25 m none none 1b cladding zone 25 to 120 m any < 2 m 5 from 2 - 5 m none > 5 m none > 3 m - adhesive zone 120 to 130 m any any features: ? iso 9100 approved ? 100% return loss test ? 100% visual inspection ? 100% insertion loss test ? 100% interferometric test ? manufactured to meet eia/tia standards ? batch tracebility ? ul approval 2 contact zone 130 to 250 m none > 10 m any ordering code: m - yyy / aaa - xx xx connectors xx - diameter of cable yyy ? master connector 17 cable ? 1.7 mm aaa 1 ? standard connector 20 cable ? 2.0 mm code type 24 cable ? 2.4 mm lc lc lc/pc 28 cable ? 2.8 mm ulc lc/upc nlc lc/apc xx - type of fibre mu mu mu/pc sm sm 9/125 m (g.652) umu mu/upc m5 mm 50/125 m nmu mu/apc m5s mm 50/125 m with scrambler 2 fc pc fc/pc m6 mm 62.5/125 m upc fc/upc m6s mm 62.5/125 m with scrambler 2 npc fc/apc sc sc sc/pc usc sc/upc nsc sc/apc st sl st/pc usl st/upc lsh pe2 lsh (e2000)/pc ue2 lsh(e2000)/upc ne2 lsh(e2000)/apc 1) aaa ? additional connector types according to con_13-01_en - ord_code datasheet 2) mode scrambler shall be used for mm measurement ? standard master patchcord length ? 2 m, other on demand ? npc ? 2.05 standard, 2.15 on demand ? other connector types on request ? polishing types: pc ? multimode connectors upc ? ultra pc, singlemode connectors apc ? angled pc, 8, singlemode connectors iec test methods: singlemode: multimode: iec 874-1 4.4.7.4. method 7 iec 874-1 4.4.7.4. method 7 other iec test methods ? according to fot_02-01_en
|
